The Journal of Contemporary Dental Practice

Register      Login

SEARCH WITHIN CONTENT

FIND ARTICLE

Volume / Issue

Online First

Archive
Related articles

VOLUME 21 , ISSUE 12 ( December, 2020 ) > List of Articles

ORIGINAL RESEARCH

Influence of Surface Modification Protocol and Type of Luting Cement on Bonding of Monolithic Zirconia to Dentin Substrate

Samah Saker, Danya Hashem

Keywords : Bonding, Cement, Ceramic primer monolithic zirconia, Selective infiltration etching

Citation Information : Saker S, Hashem D. Influence of Surface Modification Protocol and Type of Luting Cement on Bonding of Monolithic Zirconia to Dentin Substrate. J Contemp Dent Pract 2020; 21 (12):1342-1349.

DOI: 10.5005/jp-journals-10024-2984

License: CC BY-NC 4.0

Published Online: 13-04-2021

Copyright Statement:  Copyright © 2020; Jaypee Brothers Medical Publishers (P) Ltd.


Abstract

Aim and objective: To assess microtensile bond strength (μTBS) of two types of luting cement to monolithic zirconia and dentin following various surface modifications and aging. Materials and methods: Monolithic zirconia blocks were divided into four main groups. Group N: no surface modification; Group SB: sandblasted using 50 μm Al2O3 particles. Group GH: glazed with a thin film of low-fusing porcelain glaze and etched with 10% hydrofluoric acid for 60 seconds. Group CJ: sandblasted with CoJet sand. Surface-treated ceramic blocks were bonded to dentin using either self-adhesive cement or resin-modified glass ionomer cement and submitted to 3 or 150 days of water storage protocol with aging. The specimens were subjected to tensile force until de-bonding. Surface roughness (Ra, μm) was assessed after surface treatment. Analysis of variance (ANOVA) tests followed by Tukey\'s tests were used to analyze the data (α = 0.05). Results: Surface modification using selective infiltration etching (SIE) showed significantly higher μTBS (p < 0.05) compared to tribochemical silica coating, sandblasting, and no treatment groups. The surface roughness of the SB and CJ groups were statistically higher compared to GH and N groups. Conclusion: Selective glass infiltration etching was an effective method in altering the surface properties, creating a strong and durable bond to monolithic zirconia. Clinical significance: Surface treatment procedures using SIE techniques combined with the use of universal 10-Methacryloyloxydecyl dihydrogen phosphate (MDP)-containing adhesives could establish a long-lasting and strong bonding to monolithic zirconia restorations. Resin-modified glass-ionomer cement (RMGIC) is an alternative luting cement for monolithic zirconia based on the assessment of its bond strength and bond durability.


PDF Share
  1. Ghodsi S, Jafarian Z. A review on translucent zirconia. Eur J Prosthodont Restor Dent 2018;30(26):62–74.
  2. Zhang F, Vanmeensel K, Batuk M, et al. Highly-translucent, strong and aging-resistant 3Y-TZP ceramics for dental restoration by grain boundary segregation. Acta Biomater 2015;16:215–222. DOI: 10.1016/j.actbio.2015.01.037.
  3. Zhang Y, Kim JW. Graded zirconia glass for resistance to veneer fracture. J Dent Res 2010;89(10):1057–1062. DOI: 10.1177/0022034510375289.
  4. Zhang Y. Making yttria-stabilized tetragonal zirconia translucent. Dent Mater 2014;30(10):1195–1203. DOI: 10.1016/j.dental.2014.08.375.
  5. Guilardi LF, Pereira GKR, Giordani JC, et al. Effect of zirconia surface treatment, resin cement and aging on the load-bearing capacity under fatigue of thin simplified full-contour Y-TZP restorations. J Mech Behav Biomed Mater 2019;97:21–29. DOI: 10.1016/j.jmbbm.2019.04.050.
  6. Bömicke W, Rammelsberg P, Krisam J, et al. The effects of surface conditioning and aging on the bond strength between composite cement and zirconia-reinforced lithium-silicate glass-ceramics. J Adhes Dent 2019;21:567–576.
  7. de Castro HL, Corazza PH, Paes-Júnior TA, et al. Influence of Y-TZP ceramic treatment and different resin cements on bond strength to dentin. Dent Mater 2012;28(11):1191–1197. DOI: 10.1016/j.dental.2012.09.003.
  8. Yang B, Barloi A, Kern M. Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin. Dent Mater 2010;26(1):44–50. DOI: 10.1016/j.dental.2009.08.008.
  9. Paes PNG, Bastian FL, Jardim PM. The influence of Y-TZP surface treatment on topography and ceramic/resin cement interfacial fracture toughness. Dent Mater 2017;33(9):976–989. DOI: 10.1016/j.dental.2017.06.004.
  10. Yang L, Chen B, Xie H, et al. Durability of resin bonding to zirconia using products containing 10-methacryloyloxydecyl dihydrogen phosphate. J Adhes Dent 2018;20:279–287.
  11. Aung SSMP, Takagaki T, Lyann SK, et al. Effects of alumina-blasting pressure on the bonding to super/ultra-translucent zirconia. Dent Mater 2019;35(5):730–739. DOI: 10.1016/j.dental.2019.02.025.
  12. Samimi P, Hasankhani A, Matinlinna JP, et al. Effect of adhesive resin type for bonding to zirconia using two surface Pretreatments. J Adhes Dent 2015;17:353–359.
  13. Xie H, Li Q, Zhang F, et al. Comparison of resin bonding improvements to zirconia between one-bottle universal adhesives and tribochemical silica coating, which is better? Dent Mater 2016;32(3):403–411. DOI: 10.1016/j.dental.2015.12.014.
  14. Alves M, Campos F, Bergoli C, et al. Effect of adhesive cementation strategies on the bonding of Y-TZP to human dentin. Oper Dent 2016;41(3):276–283. DOI: 10.2341/15-052-L.
  15. Akay C, Çakırbay Tanış M, Şen M. Effects of hot chemical etching and 10-metacryloxydecyl dihydrogen phosphate (MDP) monomer on the bond strength of zirconia ceramics to resin-based cements. J Prosthodont 2017;26(5):419–423. DOI: 10.1111/jopr.12435.
  16. Grasel R, Santos M, Rêgo HC, et al. Effect of resin luting systems and alumina particle air abrasion on bond strength to zirconia. Oper Dent 2018;43(3):282–290. DOI: 10.2341/15-352-L.
  17. Şanlı S, Çömlekoğlu MD, Çömlekoğlu E, et al. Influence of surface treatment on the resin-bonding of zirconia. Dent Mater 2015;31(6):657–668. DOI: 10.1016/j.dental.2015.03.004.
  18. Kaimal A, Ramdev P, Shruthi CS. Evaluation of effect of zirconia surface treatment, using plasma of argon and silane, on the shear bond strength of two composite resin cements. J Clin Diagn Res 2017;11:ZC39–ZC43. DOI: 10.7860/JCDR/2017/27426.10372.
  19. Pilo R, Dimitriadi M, Palaghia A, et al. Effect of tribochemical treatments and silane reactivity on resin bonding to zirconia. Dent Mater 2018;34(2):306–316. DOI: 10.1016/j.dental.2017.11.006.
  20. Aboushelib MN, Matinlinna JP, Salameh Z, et al. Innovations in bonding to zirconia-based materials: Part I. Dent Mater 2008;24(9):1268–1272. DOI: 10.1016/j.dental.2008.02.010.
  21. Saker S, Ibrahim F, Ozcan M. Effect of different surface treatments on adhesion of in-ceram zirconia to enamel and dentin substrates. J Adhes Dent 2013;15:369–376.
  22. Salem R, Naggar GE, Aboushelib M, et al. Microtensile bond strength of resin-bonded hightranslucency zirconia using different surface treatments. J Adhes Dent 2016;18:191–196.
  23. Cheung GJ, Botelho MG. Zirconia surface treatments for resin bonding. J Adhes Dent 2015;17:551–558.
  24. Yang L, Xie H, Meng H, et al. Effects of luting cements and surface conditioning on composite bonding performance to zirconia. J Adhes Dent 2018;20:549–558.
  25. Peutzfeldt A, Sahafi A, Flury S. Bonding of restorative materials to dentin with various luting agents. Oper Dent 2011;36(3):266–273. DOI: 10.2341/10-236-L.
  26. Sabatini C, Patel M, D'Silva E. In vitro shear bond strength of three self-adhesive resin cements and a resin-modified glass ionomer cement to various prosthodontic substrates. Oper Dent 2013;38(2):186–196. DOI: 10.2341/11-317-L.
  27. Radovic I, Monticelli F, Goracci C, et al. Self-adhesive resin cements: a literature review. J Adhes Dent 2008;10:251–258.
  28. Yang L, Chen B, Meng H, et al. Bond durability when applying phosphate ester monomer-containing primers vs. Self-adhesive resin cements to zirconia: evaluation after different aging conditions. J Prosthodont Res 2020;64(2):193–201. DOI: 10.1016/j.jpor.2019.06.008.
  29. Larabi H, Cetik S, Ha H, et al. In vitro study of bonding strength of zirconia on dentin using different adhesive systems. Int J Prosthodont 2018;31(2):135–137. DOI: 10.11607/ijp.5584.
  30. Koizumi H, Nakayama D, Komine F, et al. Bonding of resin-based luting cements to zirconia with and without the use of ceramic priming agents. J Adhes Dent 2012;14:385–392.
  31. Ortorp A, Kihl ML, Carlsson GE. A 3-year retrospective and clinical follow-up study of zirconia single crowns performed in a private practice. J Dent 2009;37(9):731–736. DOI: 10.1016/j.jdent.2009.06.002.
  32. Bömicke W, Schürz A, Krisam J, et al. Durability of resin-zirconia bonds produced using methods available in dental practice. J Adhes Dent 2016;18:17–27.
  33. Shimizu H, Inokoshi M, Takagaki T, et al. Bonding efficacy of 4-META/MMA-TBB resin to surface-treated highly translucent dental zirconia. J Adhes Dent 2018;20:453–459.
  34. Bottino M, Bergoli C, Lima E, et al. Bonding of Y-TZP to dentin: Effects of Y-TZP surface conditioning, resin cement type, and aging. Oper Dent 2014;39(3):291–300. DOI: 10.2341/12-235-L.
  35. Bielen V, Inokoshi M, Munck JD, et al. Bonding effectiveness to differently sandblasted dental zirconia. J Adhes Dent 2015;17: 235–242.
  36. Rigos AE, Dandoulaki C, Kontonasaki E, et al. Effect of immediate dentin sealing on the bond strength of monolithic zirconia to human dentin. Oper Dent 2019;44(4):E167–E179. DOI: 10.2341/18- 198-L.
  37. Kim MJ, Kim YK, Kim KH, et al. Shear bond strengths of various luting cements to zirconia ceramic: surface chemical aspects. J Dent 2011;39(11):795–803. DOI: 10.1016/j.jdent.2011.08.012.
  38. Tanış MÇ, Akçaboy C. Effects of different surface treatment methods and MDP monomer on resin cementation of zirconia ceramics an in vitro study. Lasers Med Sci 2015;6(4):174–181. DOI: 10.15171/jlms.2015.15.
  39. Tzanakakis EG, Tzoutzas IG, Koidis PT. Is there a potential for durable adhesion to zirconia restorations? a systematic review. J Prosthet Dent 2016;115(1):9–19. DOI: 10.1016/j.prosdent.2015.09.008.
  40. Ernst CP, Aksoy E, Stender E, et al. Influence of different luting concepts on long term retentive strength of zirconia crowns. Am J Dent 2009;22(2):122–130.
  41. Begazo C, de Boer HD, Kleverlaan CJ, et al. Shear bond strength of different types of luting cements to an aluminum oxide-reinforced glass ceramic core material. Dent Mater 2004;20(10):901–907. DOI: 10.1016/j.dental.2003.10.011.
  42. Thurmond J, Barkmeier W, Wildweding M. Effect of porcelain surface treatments on bond strengths of composite resin bonded to porcelain. J Prosthet Dent 1994;72(4):355–362. DOI: 10.1016/0022-3913(94)90553-3.
PDF Share

© Jaypee Brothers Medical Publishers (P) LTD.