The Journal of Contemporary Dental Practice

Register      Login

SEARCH WITHIN CONTENT

FIND ARTICLE

Volume / Issue

Online First

Archive
Related articles

VOLUME 21 , ISSUE 7 ( July, 2020 ) > List of Articles

ORIGINAL RESEARCH

Assessing the Effects of Air Abrasion with Aluminum Oxide or Glass Beads to Zirconia on the Bond Strength of Cement

Kibrom Mehari, Allan S Parke, Francisco F Gallardo

Citation Information : Mehari K, Parke AS, Gallardo FF. Assessing the Effects of Air Abrasion with Aluminum Oxide or Glass Beads to Zirconia on the Bond Strength of Cement. J Contemp Dent Pract 2020; 21 (7):713-717.

DOI: 10.5005/jp-journals-10024-2879

License: CC BY-NC 4.0

Published Online: 19-08-2020

Copyright Statement:  Copyright © 2020; Jaypee Brothers Medical Publishers (P) Ltd.


Abstract

Aim: The purpose of this study was to evaluate the effects of air abrasion with aluminum oxide or glass beads to three types of zirconia containing various levels of cubic crystalline phases (3Y-TZP, Katana ML; 4Y-PSZ, Katana STML; and 5Y-PSZ, Katana UTML, Noritake) on the shear bond strength of resin cement. Materials and methods: Thirty block specimens (8 × 8 × 3.5 mm) were milled out of each zirconia material and mounted in plastic pipe. Ten specimens of each of the zirconia materials were air-abraded using 50 μm aluminum oxide particles, ten specimens were abraded using 80 μm glass beads, and ten specimens served as a control and received no surface treatment. A zirconia primer was applied to the surface of the zirconia specimens. Composite disks were bonded using a resin cement and light-cured. The specimens were stored in 37°C distilled water for 24 hours and thermocycled for 2,500 cycles. The specimens were loaded in shear on a universal testing machine. Data were analyzed with one-way and two-way ANOVAs and Tukey\'s post hoc tests (α = 0.05). Results: A significant difference in shear bond strength was found based on the surface treatment (p < 0.001), but not on the type of zirconia (p = 0.132). Conclusion: Air abrasion with glass beads or no surface treatment resulted in significantly lower bond strength of the resin cement to all three zirconia types compared to air abrasion with aluminum oxide. Clinical significance: Although air abrasion with aluminum oxide may reportedly be more likely to weaken cubic-containing zirconia compared to air abrasion with glass beads, the use of aluminum oxide results in greater bond strength of the resin cement.


PDF Share
  1. McLaren EA, Lawson N, Choi J, et al. New high-translucent cubic-phase-containing zirconia: clinical and laboratory considerations and the effect of air abrasion on strength. Compend Contin Educ Dent 2017;38(6):e13–e16.
  2. Miyazaki T, Nakamura T, Matsumura H, et al. Current status of zirconia restoration. J Prosthodont Res 2013;57(4):236–261. DOI: 10.1016/j.jpor.2013.09.001.
  3. Zhang Y, Lawn BR. Novel zirconia materials in dentistry. J Dent Res 2018;97(2):140–147. DOI: 10.1177/0022034517737483.
  4. Zhang F, Inokoshi M, Batuk M, et al. Strength, toughness and aging stability of highly-translucent Y-TZP ceramics for dental restorations. Dent Mater 2016;32(12):e327–e337. DOI: 10.1016/j.dental.2016. 09.025.
  5. Denry I, Kelly JR. State of the art of zirconia for dental applications. Dent Mater 2008;24(3):299–307. DOI: 10.1016/j.dental.2007.05. 007.
  6. Blatz MB, Conejo J. The current state of chairside digital dentistry and materials. Dent Clin North Am 2019;63(2):175–197. DOI: 10.1016/j.cden.2018.11.002.
  7. Aurélio IL, Marchionatti AM, Montagner AF, et al. Does air particle abrasion affect the flexural strength and phase transformation of Y-TZP? A systematic review and meta-analysis. Dent Mater 2016;32(6):827–845. DOI: 10.1016/j.dental.2016.03.021.
  8. Zhang Y, Lawn BR, Rekow ED, et al. Effect of sandblasting on the long-term performance of dental ceramics. J Biomed Mater Res B Appl Biomater 2004;71(2):381–386. DOI: 10.1002/jbm.b.30097.
  9. Egilmez F, Ergun G, Cekic-Nagas I, et al. Factors affecting the mechanical behavior of Y-TZP. J Mech Behav Biomed Mater 2014;37:78–87. DOI: 10.1016/j.jmbbm.2014.05.013.
  10. Papia E, Larsson C, du Toit M, et al. Bonding between oxide ceramics and adhesive cement systems: a systematic review. J Biomed Mater Res B Appl Biomater 2014;102(2):395–413. DOI: 10.1002/jbm.b.33013.
  11. Le M, Larsson C, Papia E. Bond strength between MDP-based cement and translucent zirconia. Dent Mater J 2019;38(3):480–489. DOI: 10.4012/dmj.2018-194.
  12. McLaren EA, Burgess JO, Brucia J. Cubic containing zirconia (CUZR): adhesive cement or conventional cement – what are the indications? Compend Contin Educ Dent 2018;39(5):21–25.
  13. Cowen M, Wains S, Montealegre J, et al. Esthetic zirconia flexural strength after blasting with glass or alumina. J Dent Res 98(Spec Iss):2476 (www.iadr.org).
  14. Casucci A, Osorio E, Osorio R, et al. Influence of different surface treatments on surface zirconia frameworks. J Dent 2009;37(11): 891–897. DOI: 10.1016/j.jdent.2009.06.013.
  15. Wang RR, Lu CL, Wang G, et al. Influence of cyclic loading on the fracture toughness and load bearing capacities of all-ceramic crowns. Int J Oral Sci 2014;6(2):99–104. DOI: 10.1038/ijos.2013.94.
  16. Garcia Fonseca R, de Oliveira Abi-Rached F, dos Santos Nunes Reis JM, et al. Effect of particle size on the flexural strength and phase transformation of an airborne-particle abraded yttria-stabilized tetragonal zirconia polycrystal ceramic. J Prosthet Den 2013;110(6):510–514. DOI: 10.1016/j.prosdent.2013.07.007.
  17. Ozcan M, Melo RM, Souza RO, et al. Effect of air-particle abrasion protocols on the biaxial flexural strength, surface characteristics and phase transformation of zirconia after cyclic loading. J Mech Behav Biomed Mater 2013;20:19–28. DOI: 10.1016/j.jmbbm.2013. 01.005.
  18. Souza RO, Valandro LF, Melo RM, et al. Air-particle abrasion on zirconia ceramic using different protocols: effects on biaxial flexural strength after cyclic loading, phase transformation and surface topography. J Mech Behav Biomed Mater 2013;26:155–163. DOI: 10.1016/j.jmbbm.2013.04.018.
  19. Wang H, Aboushelib MN, Feilzer AJ. Strength influencing variables on CAD/CAM zirconia frameworks. Dent Mater 2008;24(5):633–638. DOI: 10.1016/j.dental.2007.06.030.
  20. Amaral M, Valandro LF, Bottino MA, et al. Low-temperature degradation of a Y-TZP ceramic after surface treatments. J Biomed Mater Res B Appl Biomater 2013;101(8):1387–1392. DOI: 10.1002/jbm.b.32957.
  21. Al-Salehi SK, Burke FJ. Methods used in dentin bonding tests: an analysis of 50 investigations on bond strength. Quintessence Int 1997;28:717–723.
PDF Share
PDF Share

© Jaypee Brothers Medical Publishers (P) LTD.