The Journal of Contemporary Dental Practice

Register      Login

SEARCH WITHIN CONTENT

FIND ARTICLE

Volume / Issue

Online First

Archive
Related articles

VOLUME 13 , ISSUE 4 ( July-August, 2012 ) > List of Articles

RESEARCH ARTICLE

Comparison of Chemical Aging and Water Immersion Time on Durability of Resin-Dentin Interface produced by an Etch-and-Rinse Adhesive

Sergio Brossi Botta, Adriana Bona Matos, Bruna Uglik Garbui, Andre Figueiredo Reis

Citation Information : Botta SB, Matos AB, Garbui BU, Reis AF. Comparison of Chemical Aging and Water Immersion Time on Durability of Resin-Dentin Interface produced by an Etch-and-Rinse Adhesive. J Contemp Dent Pract 2012; 13 (4):464-471.

DOI: 10.5005/jp-journals-10024-1170

Published Online: 01-12-2012

Copyright Statement:  Copyright © 2012; The Author(s).


Abstract

Aim

The aim of this study was to analyze and compare the influence of short-term NaOCl-storage and long-term water storage on the microtensile bond strength (μTBS) of etch-andrinse adhesive system to human dentin.

Materials and methods

Thirty-six third human molars were randomly divided into 6 groups (n = 6) according to the aging protocol: G1 (water, 24 hours); G2 (water, 6 months); G3 (water, 12 months); G4 (10% sodium hypochlorite – NaOCl, 1 hour); G5 (10% NaOCl, 3 hours) and G6 (10% NaOCl, 5 hours). A two-step etch-and-rinse adhesive (Adper Single Bond 2) was applied according to the manufacturers¡¦ instructions. A composite (Filtek Z250) was applied in four horizontal increments and was individually cured. Specimens were cut following the microtensile test technique, submitted to the different aging protocols, and tested in tension. The fracture pattern was observed in a stereomicroscope (40× magnification) and in a scanning electron microscope. The μTBS data were analyzed by ANOVA and Tukey's test (α = 0.05).

Results

The effect of storage in 10% NaOCl for 1 or 3 hours was not significantly different from that of aging in distilled water (DW) for 6 or 12 months (p > 0.05). Beams immersed in DW for 24 hours and in 10% NaOCl for 5 hours showed the highest and lowest ìTBS values respectively.

Conclusion

The aging protocols negatively influenced dentin bond strength. Aging specimens in 10% NaOCl for 1 or 3 hours can be an alternative method for long-term water storage (6 or 12 months) bond strength studies.

Clinical significance

This aging protocol allows a quick achievement of longitudinal bond strength data, so that results are available to the professionals in this area while the materials are yet present at the dental market.

How to cite this article

Garbui BU, Botta SB, Reis AF, Matos AB. Comparison of Chemical Aging and Water Immersion Time on Durability of Resin-Dentin Interface produced by an Etchand- Rinse Adhesive. J Contemp Dent Pract 2012;13(4):464-471.


PDF Share
  1. In vivo degradation of resin-dentin bonds in humans over 1 to 3 years. J Dent Res 2000;79(6):1385-91.
  2. Four-year water degradation of total-etch adhesives bonded to dentin. J Dent Res 2003;82(2):136-40.
  3. A critical review of the durability of adhesion to tooth tissue: Methods and results. J Dent Res 2005;84(2):118-32.
  4. Dental adhesion review: Aging and stability of the bonded interface. Dent Mater 2008;24(1):90-101.
  5. In vivo preservation of the hybrid layer by chlorhexidine. J Dent Res 2007;86(6):529-33.
  6. Correlation of dentin bond durability with water absorption of bonding layer. Dent Mater J 1999;18(1):11-18.
  7. Changing the course of dental education to meet future requirements. J Can Dent Assoc 1997;63(8):633-39.
  8. Influence of water-storage time on the sorption and solubility behavior of current adhesives and primer/adhesive mixtures. Oper Dent 2007;32(1):53-59.
  9. Effect of 2% chlorhexidine digluconate on the bond strength to normal versus caries-affected dentin. Oper Dent 2009;34(2):157-65.
  10. Influence of chlorhexidine digluconate concentration and application time on resin-dentin bond strength durability. Eur J Oral Sci 2009;117(5):587-96.
  11. Effects of immersion time and frequency of water exchange on durability of etch-and-rinse adhesive. J Biomed Mater Res B: Appl Biomater 2010;95B(2):339-46.
  12. Chlorhexidine preserves dentin bond in vitro. J Dent Res 2007;86(1):90-94.
  13. A review—micromorphological evidence of degradation in resin-dentin bonds and potential preventional solutions. J Biomed Mater Res B: Appl Biomater 2010;92B(1):268-80.
  14. Analysis of differential artificial aging of the adhesive interface produced by a two-step etch-and-rinse adhesive. Eur J Oral Sci 2009;117(5):618-24.
  15. Degradation of resin-dentin bonds using NaOCl storage. Dent Mater 2003;19(5):399-405.
  16. Deproteinizing effects on resin–tooth bond structures. J Biomed Mater Res B: Appl Biomater 2004;68B(1):29-35.
  17. EDTA or H3PO4/NaOCl dentine treatments may increase hybrid layers’ resistance to degradation: A microtensile bond strength and confocal-micropermeability study. J Dent 2009;37(4):279-88.
  18. EDTA treatment improves resin-dentin bonds’ resistance to degradation. J Biomed Mater Res B: Appl Biomater 2005;84(8):736-40.
  19. Differential effect of in vitro degradation on resin–dentin bonds produced by self-etch versus total-etch adhesives. J Biomed Mater Res Part A 2006;77A(1):128-35.
  20. NaOCl degradation of a HEMA-free all-in-one adhesive bonded to enamel and dentin following two air-blowing techniques. J Dent 2007;35(1):74-83.
  21. Resistance to degradation of resin-dentin bonds using a onestep HEMA-free adhesive. J Dent 2007;35(2):181-86.
  22. In situ atomic force microscopy of partially demineralized human dentin collagen fibrils. J Struct Biol 2002;138(3):227-36.
  23. Chlorination of taurine by human neutrophils. Evidence for hypochlorous acid generation. J Clin Invest 1982;70(3):598-607.
  24. Collagen type II modification by hypochlorite. Acta Biochim Pol 2003;50(2):471-79.
  25. Durability of resin dentin interfaces: Effects of surface moisture and adhesive solvent component. Dent Mater 2004;20(7):669-76.
  26. Analysis of acid-treated dentin smear debris and smear layers using confocal Raman microspectroscopy. J Biomed Mater Res B: Appl Biomater 2002;60(2):300-08.
  27. Adhesive/Dentin interface: The weak link in the composite restoration. Ann Biomed Eng 2010;38(6):1989-2003.
  28. The influence of water storage and C-factor on the dentin-resin composite microtensile bond strength and debond pathway utilizing a filled and unfilled adhesive resin. Dent Mater 2001;17(3):268-76.
  29. SEM and TEM analysis of water degradation of human dentinal collagen. J Biomed Mater Res B: Appl Biomater 2003;66B(1):287-98.
  30. Bond strength of composite to dentin using conventional, one-step, and self-etching adhesive systems. J Dent 2001;29(1):55-61.
  31. Adhesion testing of dentin bonding agents: A review. Dent Mater 1995;11(2):117-25.
  32. Regional measurement of resin-dentin bonding as an array. J Dent Res 1999;78(2):699-705.
  33. Effect of sodium hypochlorite on dentin bonding with a polyalkenoic acid-containing adhesive system. J Biomed Mater Res B: Appl Biomater 2002;60(2):316-24.
PDF Share
PDF Share

© Jaypee Brothers Medical Publishers (P) LTD.