The Journal of Contemporary Dental Practice

Register      Login

SEARCH WITHIN CONTENT

FIND ARTICLE

Volume / Issue

Online First

Archive
Related articles

VOLUME 15 , ISSUE 4 ( July-August, 2014 ) > List of Articles

RESEARCH ARTICLE

Apical Extrusion of Debris and Irrigant using Novel Preparation Systems

Emel Uzunoglu, Melahat Görduysus

Citation Information : Uzunoglu E, Görduysus M. Apical Extrusion of Debris and Irrigant using Novel Preparation Systems. J Contemp Dent Pract 2014; 15 (4):423-427.

DOI: 10.5005/jp-journals-10024-1556

Published Online: 01-08-2014

Copyright Statement:  Copyright © 2014; Jaypee Brothers Medical Publishers (P) Ltd.


Abstract

Aim

The aim of this in vitro study was to assess the amount of apically extruded debris and irrigant using Reciproc vs self-adjusting file (SAF) and to investigate the effect, if any, of gravitational force via mandibular and maxillary positioning of the teeth.

Materials and methods

Forty human mandibular premolars were randomly assigned to four groups of 10 teeth each. The root canals were instrumented according to the manufacturers’ instructions using the Reciproc and SAF. Sodium hypochlorite was used as the irrigant. The apically extruded debris was collected in pre-weighted glass vials using the Myers and Montgomery method, and teeth were placed in vials both in downward and upward positions. After drying, the mean weight of debris was assessed with a microbalance and statistically analyzed using two-way ANOVA with Bonferroni correction.

Results

All instrumentation techniques and positions caused measurable apical extrusion of debris. A significant difference was observed according to position and instrument used (p < 0.05). The Reciproc extruded significantly more debris than SAF and vial downward position extruded significantly more debris than upward position (p < 0.05).

Conclusion

Under the conditions of this study, all systems caused apical debris extrusion, especially in the downward position.

Clinical significance

According to results of this study, the SAF was associated with less debris extrusion compared to the Reciproc in both mandibular and maxillary positions.

How to cite this article

Uzunoglu E, Görduysus M. Apical Extrusion of Debris and Irrigant using Novel Preparation Systems. J Contemp Dent Pract 2014;15(4):423-427.


PDF Share
  1. The effect of maintaining apical patency on periapical extrusion. J Endod 2001;27(11):696-698.
  2. Comparison of balanced forces, endosonic and step-back filing instrumentation techniques: quantification of extruded apical debris. J Endod 1990;16(1):24-27.
  3. Incidence of postoperative pain after intracanal procedures based on an antimicrobial strategy. J Endod 2004;28(6):457-460.
  4. Quantitative evaluation of the amount of apically extruded debris using three different rotary instrumentation systems. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2006;101(2):250-257.
  5. Effect of irrigation on the production of extruded material at the root apex during instrumentation. J Endod 1975;1(7):243-246.
  6. Debris and irrigant extrusion potential of 2 rotary systems and irrigation needles. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2011;112(4):e31-35.
  7. Apically extruded debris with reciprocating single-file and full-sequence rotary instrumentation systems. J Endod 2012;38(6):850-852.
  8. Apical extrusion of debris using self-adjusting file, reciprocating single-file, and 2 rotary instrumentation systems. J Endod 2013;39(10):1278-1280.
  9. The selfadjusting file (SAF). Part 1: respecting the root canal anatomy — a new concept of endodontic files and its implementation. J Endod 2010;36(4):679-690.
  10. The selfadjusting file (SAF). Part 2: mechanical analysis. J Endod 2010;36(4):691-696.
  11. Alteration in the inherent metallic and surface properties of nickel-titanium root canal instruments to enhance performance, durability and safety: a focused review. Int Endod J 2012;45(2):113-128.
  12. Metallurgical characterization of a new nickeltitanium wire for rotary endodontic instruments. J Endod 2009;35(11):1589-1593.
  13. Evaluation of cyclic flexural fatigue of Mwire nickel-titanium rotary instruments. J Endod 2010;36(2):305-307.
  14. Assessment of apically extruded debris produced by the single-file ProTaper F2 technique under reciprocating movement. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2010;110(3):390-394.
  15. Alternating versus continuous rotation: a comparative study of the effect on instrument life. J Endod 2010;36(1):157-159.
  16. Irrigation in endodontics. Dent Clin North Am 2010;54(2):291-312.
  17. Apical extrusion of debris by manual and mechanical instrumentation. Braz Dent J 2007;18(1):16-19.
  18. A comparison of weights of debris extruded apically by conventional filing and Canal Master techniques. J Endod 1991;17(6):275-279.
  19. Shaping ability of four nickel-titanium rotary instruments in simulated S-shaped canals. J Endod 2009;35(6):883-836.
  20. Apical extrusion of debris using two hand and two rotary instrumentation techniques. J Endod 1998;24(3):180-183.
  21. Comparative investigation of two rotary nickel-titanium instruments: ProTaper versus RaCe. Part 2. Cleaning effectiveness and shaping ability in severely curved root canals of extracted teeth. Int Endod J 2004;37(4):239-248.
  22. Apically extruded debris with three contemporary Ni-Ti instrumentation systems: an ex vivo comparative study. Indian J Dent Res 2008;19(3):182-185.
  23. The effectiveness of four clinical irrigation methods on the removal of root canal debris. Oral Surg Oral Med Oral Pathol 1982;54(3):323-328.
  24. Influence of irrigant needle depth in removing bioluminescent bacteria inoculated into instrumented root canals using real-time imaging in vitro. Int Endod J 2005;38(2):97-104.
  25. Relationship between the size of patency file and apical extrusion of sodium hypochlorite. Indian J Dent Res 2009;20(4):426-430.
  26. In vitro measurement of apically extruded irrigant in primary molars. Int Endod J 1995;28(4):221-225.
PDF Share
PDF Share

© Jaypee Brothers Medical Publishers (P) LTD.