The Journal of Contemporary Dental Practice

Register      Login



Volume / Issue

Online First

Related articles

VOLUME 19 , ISSUE 1 ( January, 2018 ) > List of Articles


Effect of the Curing Temperature of Dental Composites evaluated with a Fluorescent Dye

Vanderlei S Bagnato, Mateus R Tonetto, Álvaro Borges, Maciel E da Silva Junior, Marcelo F de Andrade, Rosane de FZ Lizarelli, Flavio Simaes

Citation Information : Bagnato VS, Tonetto MR, Borges Á, E da Silva Junior M, F de Andrade M, de FZ Lizarelli R, Simaes F. Effect of the Curing Temperature of Dental Composites evaluated with a Fluorescent Dye. J Contemp Dent Pract 2018; 19 (1):3-12.

DOI: 10.5005/jp-journals-10024-2204

License: CC BY-NC 3.0

Published Online: 01-01-2018


Aim: With the development of the light-emitting diode (LED) to photo-activate composite resin, greater intensities could be reached without greater elevation of temperature in the mass of the composite resin and in the dental structure arisen from the irradiance in comparison to halogen equipments. This new scenario created a necessity to investigate the influence of temperature over the composite polymerization. Materials and methods: Several curing temperatures (Tcure— 0, 25, 50, 75, and 100°C) were used to polymerize a composite resin (Filtek Z250, 3M ESPE) for 40 and 60 s, using the halogen equipment Gnatus Optilight Digital (halogen) and two LEDs that use a new technology to assembly the diodes: LEC 1000 and bright LEC (MM Optics) (LED 1 and LED 2 respectively). The influence of curing temperature, added by the other variables studied, was evaluated using a methodology developed and improved at IFSC/USP, in which the penetration of a fluorescent dye in the body of the photopolymerized composite resin was quantified using fluorescence spectroscopy. Results: According to the final data submitted to an analysis of variance, the presence of two groups of results could be verified: Between 0 and 25°C, both had a great percentage of the dye penetration compared with other Tcure with a variation in penetration from 69.26 ± 8.19% to 90.99 ± 3.38%. In this analysis, the effects of time and temperature were highly notable (p < 0.05) and the lesser value of dye penetration took place at 60 s of photoactivation This penetration was, in average, smaller with the Tcure of 25°C. The results showed that there was an interaction between the equipment and time and between time and temperature; the other group is regarding the Tcure was from 50, 75, and 100°C, despite the p = 0.05, the effect of temperature was notable. The penetration of the dye ranged from 8.87 ± 3.55 to 39.47 ± 8.9%. The effects of equipment and time were highly notable. The penetration with the time of 60 s was in average smaller. Except with the equipment LED 1, the percentages of the dye penetration were greater with the Tcure of 100°C. The smallest average was the Tcure of 50°C and 60 s of photoactivation. Conclusion: Based on the available data regarding the influence of curing temperature on the polymerization process of composite resins, was possible to concluded that small increments of heat increased the degree of conversion. We can assume that the energy supply through the generation of heat by the photopolymerizing devices can function as a heating medium for the reagent system by reducing its viscosity and increasing the mobility and agitation of its components. Clinical significance: The dentist must be aware of the effects that exist between the activation devices on the light output and their heat transmission to the composite and the tooth itself. This heat transmission might create a polymer with better characteristics.

PDF Share
  1. Mills RW. Blue light emitting diodes-another method of light curing? Br Dent J 1995 Mar;178(5):169
  2. Newly developed curing unit using blue light emitting diodes. Dent Jpn 1998 Mar;34:49-53
  3. Optical power outputs, spectra and dental composite depths of cure, obtained with blue light emitting diode (LED) and halogen light curing units (LCUs). Br Dent J 2002 Oct;193:459-463
  4. Second generation LEDs for the polymerization of oral biomaterials. Dent Mater 2004 Jan;20(1):80-87
  5. Wear mechanisms of dental composite resins. In: Leinfelder KF, Taylor DF, editors. Posterior composites-proceedings of the international symposium on posterior composite resins. North Carolina: Chapel Hill; 1984. pp. 127-146
  6. Color dye for identification of incompletely cured composite resins. J Prosthet Dent 1984 Nov;52(5):626-631
  7. Estudo da difusão de um corante orgânico em resinas compostas polimerizadas com duas fontes de luz: Avaliação através de espectroscopia de fluorescência. 2004. 116 f. Universidade Estadual Paulista: Tese (Doutorado em Dentística Restauradora)-Faculdade de Odontologia; 2004
  8. Temperature rises produced by light sources and composites during curing. Dent Mater 1986 Aug;2(4):170-174
  9. Reaction kinetics and mechanics in photopolymerised networks. Dent Mater 2005 Jan;21(1):27-35
  10. Phillips materiais dentários. 10th ed. Rio de Janeiro: Guanabara Koogan; 1998
  11. Thermal properties of teeth. J Dent Res 1970 Jul-Aug;49(4):752-755
  12. Thermal diffusivity of composite restorative materials. J Dent Res 1987 Oct;66(10):1576-1578
  13. Microleakage: a measure of the performance of direct filling materials. Oper Dent 1984 Winter;9(1):2-9
  14. Pulse activation: Reducing resin-based composite contraction stresses at the enamel cavosurface margins. Am J Dent 1999 Jun;12(3):107-112
  15. The effect of pulse activation on microleakage of a ‘packable’ composite resin and two ‘ormocers’. J Oral Rehabil 2004 Nov;31(11):1068-1074
  16. Introduction to luminescence. In: Guilbault GG, editor. Pratical fluorescence-theory, methods and techniques. New York: Marcel Dekker; 1973. pp. 1-17
  17. Luminescence: General concepts and applications to the study of solids. In: Jameson DM, Reinhart GD, editors. Fluorescent biomolecules methodologies and applications. New York: Plenum Press; 1989. pp. 1-7
  18. Cure performance of light-activated composites by differential thermal analysis (DTA). Dent Mater 1985 Dec;1(6):231-234
  19. Performance of two blue lightemitting- diode dental light curing units with distance and irradiation-time. Dent Mater 2004 Jan;20(1):72-79
  20. Influence of paste temperature at curing on conversion rate and bending strength of light-cured dental composites. J Oral Rehabil 1996 May;23(5):298-301
  21. The effect temperature on the kinetics of diacrylate photopolymerizations studied by real-time FTIR spectroscopy. Polymer 2000 Oct;41:7681-7690
  22. Use of near-IR to monitor the influence of external heating on dental composite photopolymerization. Dent Mater 2004 Oct;20(8):766-777
  23. Monomer conversion of pre-heated composite. J Dent Res 2005 Jul;84(7): 663-667
  24. Photoinitiated polymerization of a dimethacrylate oligomer: 1. Influence of photoinitiator concentration, temperature and light intensity. Polymer 1997 Dec;38(25):6089-6096
  25. The effect of cure rate on the mechanical properties of dental resins. Dent Mater 2001 Nov;17(6):504-511
  26. The effects of light intensity, temperature, and comonomer composition on the polymerization behavior of dimethacrylate dental resins. J Dent Res 1999 Aug;78(8):1469-1476
  27. Exploiting the heterogeneity of cross-linked photopolymers to create high-Tg polymers from polymerizations performed at ambient conditions. Macromolecules 2001 Oct;34(23):8021-8025
  28. ; Kwei, TK. Free volume and other theories. In: Crank J, Park GS, editors. Diffusion in polymers. New York: Academic Press; 1968. pp. 107-125
  29. Diffusion in Polymer-solvent systems. I - Reexamination of the free volume theory. J Polymer Sci 1977 Mar;15(3):403-416.
PDF Share
PDF Share

© Jaypee Brothers Medical Publishers (P) LTD.