Citation Information :
Savabi O, Nejatidanesh F, Peimannia E. Effect of Labial Frenum Notch Size and Palatal Vault Depth on Stress Concentration in Maxillary Complete Dentures: A Finite Element Study. J Contemp Dent Pract 2009; 10 (3):59-66.
Fracture is a common cause of acrylic resin denture failure due to crack development in a site of excessive concentration of stress in the denture. The purpose of this study was to evaluate the effect of labial frenum notch size and palatal depth on stress concentration in maxillary complete dentures.
Methods and Materials
Three-dimensional finite element models of maxillary complete dentures with different palatal vault depths (shallow, medium, and deep) and different frenum notch sizes (small, medium, and large) were constructed. The stress concentration was analyzed using Nastran software and displayed in terms of von Mises stress generated under two conditions: dropping on a hard flat surface from a standard distance and applying vertical load to the occlusal surface.
Results
The greatest stress concentration was observed in the labial frenum notch. Stress increased with an increase in the size of the labial frenum notch and a decrease in the depth of the palatal vault. The stress concentration in maxillary denture bases was greater when a vertical load was applied compared with dropping the denture on a hard surface from a standard distance.
Conclusion
Using finite element analysis, the presence of a large labial frenum notch and a shallow palatal vault increased the concentration of stress in maxillary complete dentures. Stress concentration in a maxillary denture base is much greater during the application of a vertical load than when dropping the denture on a hard flat surface.
Clinical Significance
The concentration of stress at the tip of a large frenum notch and in a shallow palatal vault could have a weakening effect on the maxillary complete acrylic resin denture base making it more vulnerable to fracture. In this scenario alternative denture base strengthening strategies, such as using a metal framework, should be considered in the fabrication of maxillary complete dentures.
Citation
Nejatidanesh F, Peimannia E, Savabi O. Effect of Labial Frenum Notch Size and Palatal Vault Depth on Stress Concentration in Maxillary Complete Dentures: A Finite Element Study. J Contemp Dent Pract 2009 May; (10)3:059-066.
Stress analysis techniques in complete dentures. J Dent 1994; 22:259-64.
J Oral Rehabil 2004; 31:1130-8.
The effect of reinforcement with woven E-glass fibers on the impact strength of complete dentures fabricated with high-impact acrylic resin. J Prosthet Dent 2004; 91:274-80.
An analysis of causes of fracture of acrylic resin dentures. J Prosthet Dent 1981; 46:238-41.
Evaluation of damage to removable dentures in two cities in Finland. Acta Odontol Scand 1993; 51:363-9.
Fatigue failure in denture base polymers. J Prosthet Dent 1969; 21:257-66.
The acrylic denture: mechanical evaluation and midline fracture. Br Dent J 1961; 110:257-67.
The reinforcement of dentures. J Oral Rehabil 1999; 26:185-94.
Palatal shape and the flexural strength of maxillary denture bases. J Prosthet Dent 1985; 53:670-3.
The simulation and calculation of the fatigue of the lower complete denture in function by means of the finite element analysis. J Oral Rehabil 1998; 25:560-5.
The effect of the curing cycle upon the molecular weight and properties of denture base materials. Dent Mater 1987; 3:107-12.
The prevalence of fractured denture. A survey denture. Br Dent J 1969; 126:451-5.
Finite element analysis of the stress-concentrating effect of fraenal notches in complete dentures. Int J Prosthodont 1990; 3:238-40.
Fracture behavior of polymers. London: Champan & Hall, 1983:32-7.
An examination of the stress distribution in a soft-lined acrylic resin mandibular complete denture by finite element analysis. Int J Prosthodont 2000; 13:19-24.
The effect of occlusal contact localization on the stress distribution in complete maxillary denture. J Oral Rehabil 2006; 33:509-13.
A functional stress analysis of the maxillary complete denture base. J Prosthet Dent 1962; 12: 865-72.
A study of of stress distribution in complete upper dentures. Dent Pract 1965; 15:374-79.
Stress in denture bases. Br Dent J 1956; 100:167-71.
Investigation of the strain produced in maxillary complete dentures in function. J Oral Rehabil 1979; 6:241-56.
Clinical studies of strain behavior of complete dentures. J Biomed Eng 1982; 4:49-54.
Clinical deformation of maxillary complete dentures. J Dent 1983; 11:224-30.
Bite forces and functional loading levels in maxillary complete dentures. Dent Mater 1985; 1:66-70.
On the clinical deformation of maxillary complete dentures. Influence of the processing techniques of acrylate-based polymers. Acta Odontol Scand 1988; 46:287-95.
On the clinical deformation of maxillary complete dentures. Influence of denture-base design and shape of denture-bearing tissue. Acta Odontol Scand 1989; 47:69-76.
The functional deformation of maxillary complete dentures in patients with flabby alveolar ridges. Part II: After surgery. Swed Dent J 1991; 15:63-70.
Using holography for measurement of in vivo deformation in a complete maxillary denture. J Prosthet Dent 1985; 54:843-6.
Fracture surface characteristics of damaged acrylic-resin-based dentures as analysed by SEM-replica technique. J Oral Rehabil 1996; 23:524-9.
Effects of the position of artificial teeth and load levels on stress in the complete maxillary denture. J Prosthet Dent 2002; 88:415-22.
Finite element analysis of the effect of the bucco-lingual position of artificial posterior teeth under occlusal force on the denture supporting bone of the edentulous patient. J Oral Rehabil 2003; 30:646-52.
In vitro study of a mandibular implant overdenture retained with ball, magnet, or bar attachments: comparison of load transfer and denture stability. Int J Prosthodont 2003; 16:128-34.
